Verifying The System Time Settings; Viewing The System Event Log (Sel); Viewing The Sel - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

Basic software procedures
5.2.5

Verifying the system time settings

I
This task only applies to Linux environments.
Ê After replacing the system board, ask the system administrator whether the
RTC or UTC time standard is to be used as system time.
I
If the system time (RTC) is set to UTC, the SEL (System Event Log)
time stamps may differ from the local time.
Ê Check the system time set in the RTC (Real Clock Time), and if applicable,
correct it in the BIOS.
Ê Enter the BIOS.
Ê Select the Main menu.
Ê Under System Time and System Date specify the correct time and date.
I
By default, the system time set in the BIOS is RTC (Real Time Clock)
local time. If your IT infrastructure relies on universally accepted time
standards, set the System Time to UTC (Universal Time, Coordinated)
instead. Greenwich Mean Time (GMT) can be considered equivalent
to UTC.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify settings,
refer to the corresponding BIOS Setup Utility reference manual.
5.2.6

Viewing the System Event Log (SEL)

5.2.6.1

Viewing the SEL

You can view the System Event Log (SEL) using the ServerView Operations
Manager:
Viewing the SEL in ServerView Operations Manager
Ê In ServerView Operations Manager Single System View select Maintenance
from the Information / Operation menu.
Ê Under Maintenance select System Event Log.
72 Upgrade and Maintenance Manual
TX1310 M1