Replacing The Cmos Battery - Intel SR1530CL User Manual

10. Replace the server board. For instructions, see
page
11. Install the processor(s) and heat sinks. For instructions, see
Processor" on page 36
12. Install the DIMMs. For instructions, see
13. Install the PCI riser assembly. For instructions, see
Assembly" on page
14. Reconnect all cables to the server board. For instructions, see
page
15. Install the processor air duct. For instructions, see
Duct" on page
16. Install the server system cover. For instructions, see
Cover" on page
17. Plug all peripheral devices and the AC power cable into the server.

Replacing the CMOS Battery

Caution: The CMOS battery is NOT hot swappable. Before removing or replacing the CMOS
battery, you must first take the server out of service, turn off all peripheral devices
connected to the system, turn off the system by pressing the power button, and unplug the
AC power cord from the system or wall outlet.
The lithium battery on the server board powers the RTC in the absence of power. When
the battery starts to weaken, it loses voltage, and the server settings stored in CMOS RAM
in the RTC (for example, the date and time) may be wrong. Contact your customer service
representative or dealer for a list of approved devices.
Warning: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the equipment manufacturer. Discard used batteries
according to manufacturer's instructions.
Advarsel: Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun ske med
batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren.
Advarsel: Lithiumbatteri - Eksplosjonsfare. Ved utskifting benyttes kun batteri som anbefalt av
apparatfabrikanten. Brukt batteri returneres apparatleverandøren.
Varning: Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en ekvivalent typ
som rekommenderas av apparattillverkaren. Kassera använt batteri enligt fabrikantens
instruktion.
Varoitus: Paristo voi räjähtää, jos se on virheellisesti asennettu. Vaihda paristo ainoastaan
laitevalmistajan suosittelemaan tyyppiin. Hävitä käytetty paristo valmistajan ohjeiden
mukaisesti.
70
67.
and "Installing the Heat Sink" on page
62.
95.
32.
29.
Intel
"Installing the Server Board" on
"Installing DIMMs" on page
"Installing the PCI Riser
"Installing the Processor Air
"Installing the Server System
®
Server System SR1530CL / SR1530HCL / SR1530HCLS
"Installing the
39.
34.
"Cable Routing" on