Table of Contents
Advertisement
PX865PEL-800
Onboard Device
If you highlight the "INTEL OnChip PCI Device" label and then press the enter key, it will take you
a submenu with the following options:
USB Controller
This option should be enabled if your system has a USB port installed on the system board. You will
need to disable this feature if you add a higher performance controller.
Options: Enabled (default)、Disabled
USB 2.0 Controller
This option should be enabled if your system has a USB 2.0 device installed on the system board.
You will need to disable this feature if you install a USB 1.1 device.
Options: Enabled (default)、Disabled
USB Keyboard Support
Enables support for USB attached keyboards. Options: Disabled (default)、Enabled
AC97 Audio
This item allows you to control the onboard AC'97 audio. Options: Auto (default)、Disabled
Onboard LAN Control
This item allows you to enable or disable onboard LAN Controller.
Options: Enabled (default)、Disabled
Onboard I/O Chip Setup
PWRON After PWR-Fail
This field will determine whether your system will boot after restoring power after a power failure. If
you select "On", the system will boot whether or not the system was on before power failure. If you
select "Former-Sts", the system will be restored to the status before the power failure.
Options: Off (default)、On、Former-Sts
Power On Function
This option allows you to select a way to power on your computer. Options: Password、Hot KEY、
Mouse Left、Mouse Right、Any KEY、BUTTON ONLY (default), and Keyboard 98
KB Power On Password
Supply a password that your system will use as part of the power-on sequence. This field is only
configurable when "Power On Function" is set to "Password".
31
Advertisement
Table of Contents
