Wiring Earth Ground & Lighting /Surge Ground - Korenix JetNet 6710G User Manual

JetNet 6710G/ JetNet 6810G User Manual
Picture 10 – M12 Assembly
.
2.4 Wiring Earth Ground & Lighting /Surge Ground
To ensure the system will not be damaged by noise or any electrical shock,
we suggest you to make exact connection with JetNet 6710G /JetNet
6810G with Earth Ground.
On the left side of JetNet 6710G/6810G, there is one earth ground screw.
Loosen the earth ground screw by screw driver; then tighten the screw
after earth ground wire is connected. To resistance the electromagnetic
interefere, the chassis ground must well connection with earth ground.
The Lighting /Surge Grounding also present on the left side, and nearby
wall mounting screw holes. It is designed to provide a surge noise leaking
grounding loop for inner surge protection-circuit.
Remove the surge screw before perform insulation testing, in case if not
remove will damage the protect function.
It is recommended direct connects to surge grounding system.
19