Monitor And Diag - Korenix JetNet 6710G User Manual

4.13 Monitor and Diag

JetNet 6710G/6810G provides several types of features for you to monitor
the status of the switch or diagnostic for you to check the problem when
encountering problems related to the switch. The features include MAC
Address Table, Port Statistics, Port Mirror, Event Log and Ping.
Following commands are included in this group:
4.13.1 MAC Address Table
4.13.2 Port Statistics
4.13.3 Port Mirror
4.13.4 Event Log
4.13.5 Topology Discovery
4.13.6 Ping
4.13.7 CLI Commands of the Monitor and Diag
4.13.1 MAC Address Table
JetNet 6710G/6810G provides 8K entries in MAC Address Table. In this
page, users can change the Aging time, add Static Unicast MAC Address,
monitor the MAC address or sort them by different packet types and ports.
Click on Apply to change the value.
Aging Time (Sec)
Each switch fabric has limit size to write the learnt MAC address. To save
more entries for new MAC address, the switch fabric will age out non-used
MAC address entry per Aging Time timeout. The default Aging Time is 300
seconds. The Aging Time can be modified in this page.
Static Unicast MAC Address
In some applications, users may need to type in the static Unicast MAC
address to its MAC address table. In this page, you can type MAC Address
(format: xxxx.xxxx.xxxx), select its VID and Port ID, and then click on Add
to add it to MAC Address table.
MAC Address Table
In this MAC Address Table, you can see all the MAC Addresses learnt by
the switch fabric. The packet types include Management Unicast, Static
Unicast, Dynamic Unicast, Static Multicast and Dynamic Multicast. The
table allows users to sort the address by the packet types and port.
Packet Types: Management Unicast means MAC address of the switch.
It belongs to CPU port only. Static Unicast MAC address can be added
and deleted. Dynamic Unicast MAC is MAC address learnt by the switch
Fabric. Static Multicast can be added by CLI and can be deleted by Web
and CLI. Dynamic Multicast will appear after you enabled IGMP and the
switch learnt IGMP report.
Click on Remove to remove the static Unicast/Multicast MAC address.
Click on Reload to refresh the table. New learnt Unicast/Multicast MAC
JetNet 6710G/ JetNet 6810G User Manual
146