Wiring Earth Ground; Dip Switches - Korenix JetNet 3810G Series User Manual

2.4 Wiring Earth Ground

To ensure the system will not be damaged by noise or electric shock, we suggest
making a direct connection between the JetNet 3810(Gf)/3806G/ 3710G and earth
ground to avoid system damage. (Please refer to the upside photo)
1. On the bottom of the JetNet 3810(Gf)/3806G/ 3710G, there is one earth ground
screw.
2. Loosen the earth ground screw with a screwdriver
3. Tighten the screw after the earth ground wire is connected.

2.5 DIP Switches

10-Pin Dip switches are located on the bottom panel of JetNet 3810(Gf)/ 3710G for
configuration purpose (6-Pin for JetNet 3806G). They are used to configure Port
Alarm to corresponding TX ports.
Korenix 14
JetNet 3810(Gf)/ 3806G/ 3710G