Ping Utility - Korenix JetNet 6710G User Manual

JetNet 6710G/ JetNet 6810G User Manual
system which supports LLDP function; With LLDP function, NMS can easier
maintain the topology map, display port ID, port description, system
description, VLAN ID... Once the link failure, the topology change events
can be updated to the NMS as well. The LLDP Port State can display the
neighbor ID and IP leant from the connected devices. You can purchase
Korenix JetView Pro iNMS as your network management platform.
Once configured the Management Switch's LLDP setting, it will be auto
discover by the NMS platform, like as JetView Pro.
The configuration and settings explain as following.
LLDP: Select Enable/Disable to enable/disable LLDP function.
LLDP Configuration: To configure the related timer of LLDP.
LLDP Timer: the interval time of each LLDP and counts in second; the
valid number is from 5 to 254, default is 30 seconds.
LLDP Hold time: The TTL (Time To Live) timer. The LLDP state will be
expired once the LLDP is not received by the hold time. The default is 120
seconds.
Local port: the current port number that linked with neighbor network
device.
Neighbor ID: the MAC address of neighbor device on the same network
segment.
Neighbor IP: the IP address of neighbor device on the same network
segment.
Neighbor VID: the VLAN ID of neightbor device on the same network
segment.

4.13.6 Ping Utility

This page provides Ping Utility for users to ping remote device and check
whether the device is alive or not. Type Target IP address of the target
device and click on Start to start the ping. After few seconds, you can see
the result in the Result field
.
150