Snmp - Korenix JetNet 6710G User Manual

4.10 SNMP

Simple Network Management Protocol (SNMP)
is a protocol used for exchanging management
information between network devices. SNMP is
a member of the TCP/IP protocol suite. JetNet
6710G/6810G series support SNMP v1 and v2c
and V3.
An SNMP managed network consists of two
main components: agents and a manager. An
agent is a management software module that
resides in a managed switch. An agent
translates the local management information
from the managed device into a SNMP
compatible format. The manager is the console through the network.
Following commands are included in this group:
4.10.1 SNMP Configuration
4.10.2 SNMPv3 Profile
4.10.3 SNMP Traps
4.10.4 SNMP CLI Commands for SNMP
4.10.1 SNMP Configuration
This page allows users to configure SNMP V1/V2c Community. The
community string can be viewed as the password because SNMP V1/V2c
doesn't request you to enter password before you try to access SNMP
agent.
The community includes 2 privileges, Read Only and Read and Write.
With Read Only privilege, you only have the ability to read the values of
MIB tables. Default community string is Public.
With Read and Write privilege, you have the ability to read and set the
values of MIB tables. Default community string is Private.
JetNet 6710G allows users to assign 4 community strings. Type the
community string and select the privilege. Then press Apply.
Note: When you first install the device in your network, we highly
recommend you to change the community string. Since most SNMP
management application uses Public and Private as their default
community name, this might be the leakage of the network security
JetNet 6710G/ JetNet 6810G User Manual
.
124