065-7940B-WS 24-Port 10/100/1000 WebSmart Switch with 4 SFP Ports
Appendix- Command Line Interface
Start-up and Terminal configuration
To start the Command Line Interface, please connect a PC COM port to the
RS-232 connector and activate terminal emulation software (e.g. Windows'
HyperTerminal).
The terminal emulation software should be started in the following configuration:
1.
Data rate: 115200 baud
2.
Data format: 8 data bits, 1 stop bit and no parity
3.
Flow control: none.
4.
Click the property icon, select settings, and make sure that: The Function,
arrow, and ctrl keys act as: Terminal keys, Emulation: VT100
Login/Logout Procedures
To get access to the CLI, you will have to get the username and password for login.
The default username and password are "admin" and "admin".
Note: We recommend that you configure a new username and password to
prevent unauthorized users from accessing the device.
30