The Interface And Operating Way Of Telnet/Out-Of-Band; Cli Command And Assist Of Use; Phrase Help - SignaMax 065-7707 User Manual

5.3 The interface and operating way of TELNET/Out-of-Band

After you use the correct user's name and password(the dafult psaaword are admin),you will
log on the interface of TELNET/Out-of-Band Management.
Management interface is based on command line. After log in, input "?"and you will see
command lines as below:

5.4 Cli command and assist of use

5.4.1 Phrase Help

11111111111111111111111111111111111111111111111111
There is help information set at the command list interface. If you are not so sure about a
command phrase, please input the initial words you can remember and then input "?"
or space following"？". The command will suggest the possible
command list. And you can input the command phrase according to this suggestion，
and press "Enter" button to run this command.
【For instance】
Switch#set ip
111111111111111111111111111111
1111
34