Subscribe to Our Youtube Channel
Related Manuals for SignaMax 065-7508
Summary of Contents for SignaMax 065-7508
- Page 1 Signamax Connectivity System 065-7508 Signamax™ Connectivity Systems 8 Ports Nway Fast Ethernet Web Management Switch Model: 065-7508 User’s Manual www.signamax-us.com www.signamax-eu.com...
- Page 2 Signamax Connectivity System 065-750 FCC Warning This device has been tested and found to comply with limits for a Class B digital device, pursuant to Part 2 and 15 of the FCC Rules. These limits are designed to provide reasonable...
- Page 3 Signamax Connectivity System 065-7508 8 Ports Nway Fast Ethernet Web Management Switch Introduction 065-7508 Switch provides 8 10/100Mbps ports. 065-7508 Switch was designed for easy installation and high performance in an environment where traffic on the network number user increase continuously.
- Page 4 Signamax Connectivity System 065-7508 www.signamax-us.com www.signamax-eu.com...
- Page 5 Signamax Connectivity System 065-7508 Key Features 8 Port 10/100Base T/TX Nway (Auto-negotiation) Switch with RJ-45 connectors. Palm size with transparent enclosure design Auto-detect of Full/Half-duplex modes in all ports Dedicated full-duplex 200Mbps bandwidth on each port Broadcast storm control Store & Forward switching methods IEEE 802.3x flow control for Full-duplex...
- Page 6 Signamax Connectivity System 065-7508 Package Contents Before you start to install 065-7508 Switch, please verify your package that contains the following items: One 065-7508 Fast Ethernet Switch One Power Adapter One CD with User’s Manual www.signamax-us.com www.signamax-eu.com...
- Page 7 Signamax Connectivity System 065-7508 Note: If any of these items is found missing or damaged, please contact your local supplier for replacement. Front Panel Layout Ⅰ. 8 RJ-45 10/100Mbps Switch Ports There are 1~8 RJ-45 connectors on the front panel for connecting to servers, workstation other devices.
- Page 8 Signamax Connectivity System 065-7508 Ⅲ. LED Indicators of 8 Port 10/100Mps Switch Status Description No. Of Power Power on Power LINK/ACT. On 10/100Mbps 8 (1~8) port for connection Flashing 10/100Mbps 8 (1~8) for data activating Ⅳ. LED Definitions Power LED ：The unit is powered on...
- Page 9 Signamax Connectivity System 065-7508 and ready for use. ：The unit is powered off. LINK/ACT LED ：The port is ready for 10/100Mbps connection. Flashing ：The data is transmitted or received on the port. www.signamax-us.com www.signamax-eu.com...
- Page 10 Signamax Connectivity System 065-7508 Technical Specifications 1. Standards Compliance - IEEE 802.3 10BASE-T - IEEE 802.3u 100BASE-TX 2. Number Of Ports - 8 integrated ports (10/100Mbps Nway port) 3. Fully Flow Control Supported - Half-duplex mode: Backpressure - Full-duplex mode: IEEE 802.3x 4.
- Page 11 Signamax Connectivity System 065-7508 10. Power Consumption - 4 Watts (Max) 11. Operating Temperature - 0℃~ 55℃ 12. Store Temperature - 20℃~ 90℃ 13. Humidity - 10% ~90% RH (Non-condensing) 14. Dimension (L × W × H) 175mm × 110mm × 25mm 15.
- Page 12 Signamax Connectivity System 065-7508 Web Management Switch Ⅰ. Features Overview Supports real time status (link, speed, duplex) of each port. Supports port setting for enable or disable operation (the 1st port can’t be disabled). Supports port setting for N-Way or force mode operation.
- Page 13 Signamax Connectivity System 065-7508 Ⅱ. Configure Please follow the steps to configure 065-7508 Switch. Step 1: Use a twisted pair cable to connect 065- 7508 Switch to your PC and power on the Switch Step 2: Set your PC’s IP to 192.168.2.xx www.signamax-us.com...
- Page 14 Signamax Connectivity System 065-7508 Step 3: Open the web browser (like IE…), and then go to the 192.168.2.1 site, and you will see the login screen. Key in the user name and the password to pass the authentication, and the user ID and the password is “admin”.
- Page 15 Signamax Connectivity System 065-7508 Step 4: On the following home page, select the configuration by clicking the icon. It includes, - Administrator - Port Management - VLAN Setting - QoS Setting - Port Security - Logout www.signamax-us.com www.signamax-eu.com...
- Page 16 Signamax Connectivity System 065-7508 Administrator: Authentication Configuration Change the password, or use a new user ID and the password. Click “Update” to confirm the new change, and then power off/on the Switch to take the new ID and the password effectively.
- Page 17 Signamax Connectivity System 065-7508 Administrator: System IP Configuration Change the IP address by typing the new IP and press “Update” to complete the change. www.signamax-us.com www.signamax-eu.com...
- Page 18 Signamax Connectivity System 065-7508 Administrator: System Status It shows the switch MAC address, and you can select “Back to the last display” or “Logout” when the time’s out. www.signamax-us.com www.signamax-eu.com...
- Page 19 Signamax Connectivity System 065-7508 Administrator: Load Default Setting to EEPROM Click “Load” to load the factory default setting change, and then reset the switch by power off/on to take it effectively. www.signamax-us.com www.signamax-eu.com...
- Page 20 Signamax Connectivity System 065-7508 Administrator: Firmware Update Follow the instruction on the screen to update the new firmware. The firmware is the latest version, please contact with your sales agents to get the new firmware information. www.signamax-us.com www.signamax-eu.com...
- Page 21 Signamax Connectivity System 065-7508 Port Management: Port Control Configuration “Port No.” is meant to the port number you want to configure it. www.signamax-us.com www.signamax-eu.com...
- Page 22 Signamax Connectivity System 065-7508 “Link Capability” is meant you can choose the port is Auto-Nego. mode or Force mode on 100M or 10M. “Duplex” is meant you can select the port full half duplex enable/disable the port. Port Management: Bandwidth Control “Port No.”...
- Page 23 Signamax Connectivity System 065-7508 “TX Rate” is meant you can set the maximum transmission rate of the selected port and choose the full speed or 128K/256K/512K/1M/2M/4M/8M speed. “RX Rate” is meant you can set the maximum receiving rate of the selected port and choose full speed or 128K/256K/512K/1M/2M/4M/8M speed.
- Page 24 Signamax Connectivity System 065-7508 Enable or disable the broadcast storm protection feature. Port Management: Max Packet Length www.signamax-us.com www.signamax-eu.com...
- Page 25 Signamax Connectivity System 065-7508 Select the maximum packet length setting, 1536 byte or 1522 byte by the switch. VLAN Setting: Group VLAN setting www.signamax-us.com www.signamax-eu.com...
- Page 26 Signamax Connectivity System 065-7508 There are 4 VLAN groups, 01, 02, 03, 04, can be used. Select a group, and then click the port number which you want to put it into the selected VLAN group. VLAN Setting: Multi to 1 Setting www.signamax-us.com...
- Page 27 Signamax Connectivity System 065-7508 This is a special design for easily setting the Switch VLAN into “ VLAN Per Port “. After this setting, all ports can only connect to the destination port. www.signamax-us.com www.signamax-eu.com...
- Page 28 Signamax Connectivity System 065-7508 QoS Setting: Class of Service Configuration Select the class of service for each port. www.signamax-us.com www.signamax-eu.com...
- Page 29 Signamax Connectivity System 065-7508 QoS Setting: High Priority Queue Configuration Select WRR low weight 1/4 or 1/8. www.signamax-us.com www.signamax-eu.com...
- Page 30 Signamax Connectivity System 065-7508 QoS Setting: Customization Diffserv Please follow the instruction on the screen to update the setting. www.signamax-us.com www.signamax-eu.com...
- Page 31 Signamax Connectivity System 065-7508 Port Security When this function is enabled, the port will record the first receiving source MAC address as the security MAC address and only allow the packet which has the MAC address activating on the port.
Need help?
Do you have a question about the 065-7508 and is the answer not in the manual?
Questions and answers