Control Panel - Panasonic SD-2501 Operating Instructions And Recipes

Control Panel

Menu
Press this pad to choose menu. Menu number will
display and each time this pad is pressed, menu
number will change to the next choice.
(Hold the pad to advance more quickly)
See P. 10 and 11 for menu number.
 Operation status
: displayed for the current stage of the program. Ingredients are being regulated on the
'Rest' stage before kneading.
: displayed when there has been an interruption in the power supply.
: displayed when adding ingredients manually on menu 11 and 23.
Size
Press this pad to choose
size. See P. 10 for
available menu.
• XL
• L
• M
Timer
Set delay timer (time until bread is
ready) or set the baking/cooking
time for menu 15, 26 and 27.
'▲' Press this pad to increase the
time.
'▼' Press this pad to decrease
the time.
This picture shows all words and symbols, but during operation only those relevant will be displayed.
 Time remaining until program finished
Also when adding ingredients manually, display will
show the time until adding extra ingredients in the
program.
Crust
Start
Press this pad to
The start light will
choose crust colour. flash during program
See P. 10 for available selection. Press the start
pad when programming
menu.
is completed.
• Dark
When the start pad is
pressed, the start light
• Medium
will stop flashing and
become constant.
• Light
Stop
If you wish to change the
program, you must stop the
operation by holding down the
stop pad for more than 1 second.
The start light will go off. Then
re-program accordingly.
7