Overview; General Notes For Servicing - Lexmark 3200 Service Manual

1. Overview

1.1

General Notes for Servicing

1.2 Product Description
1.3 Product specifications
1.4 Device Configuration
1.5 Theory of Operation
This manual is intended to be used by the maintenance engineers. It describes the areas to be
maintained, the installation, the disassembly, and the main trouble shooting guides.
Please take your time to read this manual thoroughly to obtain comprehensive knowledge about the
3200MFP before serving the unit.
1.1 General notes for servicing
(1) Before trying to disassemble the 3200MFP, make sure the power supply cord of the 3200MFP is
disconnected from the power outlet. Under any circumstance, do not remove or install the
connectors on the 3200MFP with the power supply turned ON.
(2) Use caution not to drop small parts or screws inside the unit when disassembling and
reassembling. If left inside, they might cause the malfunction of the unit.
(3) Do not pull the connector cable when disconnecting it. Hold the connector.
(4) When carrying the scanning head unit, put it in an anti-static bag.
(5) Keep the document table glass surface always clean. If contaminated, use a dry clean cloth for
cleaning.
(6) Use caution not to injure your fingers or hands when disassembling or reassembling the unit.
1-1