Aeroflex NAV 2000R Operation Manual page 94

TONE #1 FREQUENCY
Command:
Values:
Default:
TONE #2 FREQUENCY
Command:
Values:
Default:
SELCAL
RF LEVEL
Command:
dBm Values:
uV Values:
mV Values:
Default:
RF ON/OFF
Command:
Values:
Default:
SELECTIVE CALLING INITIATE
Command:
Values:
Default:
PULSE PERCENT MODULATION
Command:
Values:
Default:
TONE AMPLITUDE DIFFERENCE
Command:
Values:
Default:
PULSE #1 CODE
Command:
Values:
Default:
PULSE #2 CODE
Command:
Values:
Default:
PULSE #1 TONE #1 FREQUENCY
Command:
Values:
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG A-9
Aeroflex Operation Manual
COM FREQ1=
10 Hz to 18000.0 Hz (.1 Hz steps)
1000.0 Hz
COM FREQ2=
10 Hz to 18000.0 Hz (.1 Hz steps)
2000.0 Hz
RF LEVEL=
-127 dBm to 0 dBm
.100 uV to 890 uV (to nearest .1 dBm)
1.00 mV to 224 mV (to nearest .1 dBm)
-127.0 dBm
SCL RF KEY=
ON, OFF
OFF
SCL INIT=
ACTIVE, INACTIVE
INACTIVE
SCL %MOD=
0 to 99.00% (0.01% steps)
30.00%
SCL DIFF=
-40 to +40 dB (1 dB steps)
0 dB
SCL 1 CODE=
AA - SS
AB
SCL 2 CODE=
AA - SS
CD
SCL 1 TONE 1=
100 to 9999.9 Hz (0.1 Hz steps)