Section Ii - Aeroflex NAV 2000R Operation Manual

Mass (Weight)
Ventilation Requirements
IEC Overvoltage Category
Pollution Degree
Equipment Meets These Listed Standards
Cables and Wires
Warm Up Duration
Nonvolatile Memory Life
Data Input / Output
Electrical Specifications
Power Requirements
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG 1-2
Aeroflex Operation Manual
61.2 kg (135 lbs.)
Keep the ventilation openings clear.
II
1
EN 61010-1 (IEC 61010-1)
EN 61328
EN 61326 Class A
1. It is recommended that all cables connecting to the
AUDIO OUTPUT (A3J5), EXTERNAL MOD INPUT
(A4A2P1), 10 MHZ OUT (A5A1J7), and 10 MHZ IN
(A5A1J6) terminals (ports) use M17/84-RG223
double shielded coaxial cable, or equivalent,
properly terminated to BNC connectors.
2. It is recommended that the cable connecting to the
RF OUTPUT (A1J1) terminals (port) use M17/75-
RG214 double shielded coaxial cable, or equivalent,
properly terminated to N connectors.
30 min minimum for specified performance.
10 years minimum data retention in the absence of
external power.
Compatible with IEEE Standard 488-1978
115/230 V
60/50 Hz
750 mA max, 70 W