Gpib Command Quick Reference - Aeroflex NAV 2000R Operation Manual

GENERAL COMMANDS
STATUS
Command:
SET MODE
Command:
Values:
WHAT MODE
Command:
Values:
LOCAL
Command:
SET DEFAULTS
Command:
REVERSE POWER PROTECTION RESET
Command:
RF LEVEL
Command:
uV Values:
mV Values:
Default: -
AUDIO LEVEL
Command:
Values:
Default:
RF FREQUENCY
Command:
Values:
VOR
RF LEVEL
Command:
dBm Values:
uV Values:
mV Values:
Default:
BEARING
Command:
Values:
Default:
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG A-1
Aeroflex Operation Manual
APPENDIX A

GPIB COMMAND QUICK REFERENCE

STAT?
MODE=
VOR, VORa, LOC, LOCa, G/S, MKR, COM, EMM
MODE?
VOR, VORa, LOC, LOCa, G/S, MKR, COM, EMM
LOCAL
DEFAULT
RPP RESET
RF LEVEL= dBm Values: -127 dBm to 0 dBm
.100 uV to 890 uV (to nearest .1 dBm)
1.00 mV to 224 mV (to nearest .1 dBm)
127.0 dBm
AUDIO LEVEL=
0 to 1.000 Vrms (0.001 Vrms steps)
0.500 Vrms
RF FREQ=
0.150 MHz to 450.000 MHz (0.00001 MHz steps)
RF LEVEL=
-127 dBm to 0 dBm
.100 uV to 890 uV (to nearest .1 dBm)
1.00 mV to 224 mV (to nearest .1 dBm)
-127.0 dBm
BEARING=
0.00 to 359.99 degrees (0.01 degree steps)
0.00 degrees