Aeroflex NAV 2000R Operation Manual page 41

Aeroflex Operation Manual
TONE DIFF
This field programs the tone amplitude difference of Pulse #1 to Pulse #2. This is a numeric entry field
type and is programmable from -40 to +40 dB in 1 dB steps. The default setting is 0 dB.
PAGE 2:
PULSE #1 CODE
Allows modification to the PULSE #1 TONE #1 and TONE #2 frequencies. The field uses the
alphanumeric field entry. The two characters in the field must fall within the range A-S. The default for
this field is the string "AB". These characters correspond to the frequency displayed in the PULSE #1
TONE #1 and PULSE #1 TONE #2 bubbles.
PULSE #1 TONE #1
This field is used to program the first tone frequency, in pulse number one. The frequency shown here
corresponds to the code entered into the PULSE #1 CODE bubble (first character). This numeric data
field may be edited to produce non-standard frequencies.
PULSE #1 TONE #2
This field is used to program the second tone frequency, in pulse number one. The frequency shown
here corresponds to the code entered into the PULSE #1 CODE bubble (second character). This
numeric data field may be edited to produce non-standard frequencies.
PULSE #2 CODE
Allows modification to the PULSE #2 TONE #1 and TONE #2 frequencies. The field uses the
alphanumeric field entry. The two characters in the field must fall within the range A-S. The default for
this field is the string "CD". These characters correspond to the frequency displayed in the PULSE #2
TONE #1 and PULSE #2 TONE #2 bubbles.
PULSE #2 TONE #1
This field is used to program the first tone frequency, in pulse number two. The frequency shown here
corresponds to the code entered into the PULSE #2 CODE bubble (first character). This numeric data
field may be edited to produce non-standard frequencies.
PULSE #2 TONE #2
This field is used to program the second tone frequency, in pulse number two. The frequency shown
here corresponds to the code entered into the PULSE #2 CODE bubble (second character). This
numeric data field may be edited to produce non-standard frequencies.
COM TEST TONE FREQUENCY
This field is used to program the COMM test tone frequency from 10.0 Hz to 18000.0 Hz in 0.1 Hz steps.
The default for this field is 1000 Hz.
COM TEST TONE MODULATION
This field programs the modulation percentage of the COM test tone. This is a numeric entry field type
and is programmable from 0 to 99% in 0.01% steps. The default for this field is 30%.
NAV 2000R SIGNAL GENERATOR - REV. 0 – JULY 26, 2007 - PG 3-21