Wan - Main Port (Adsl); Pppoe Connection (Adsl) - Billion BiPAC 7800 User Manual

(802.11n) dual wan adsl2+ firewall router
Hide thumbs Also See for BiPAC 7800:
Table of Contents

Advertisement

WAN – Main Port (ADSL)
A WAN (Wide Area Network) is an outside connection to another network or the Internet.

PPPoE Connection (ADSL)

PPPoE (PPP over Ethernet) provides access control in a manner similar to dial-up services using
PPP.
VPI/VCI: Enter the information provided by your ISP.
Username: Enter the username provided by your ISP. You can input up to 256 alphanumeric
characters (case sensitive).
Password: Enter the password provided by your ISP. You can input up to 32 alphanumeric characters
(case sensitive).
Service Name: This item is for identification purposes. If it is required, your ISP will provide you the
necessary information. Maximum input is 32 alphanumeric characters.
Encap. method: Select the encapsulation format. Select the one provided by your ISP.
Auth. Protocol: Default is Auto. Please consult your ISP on whether to use Chap, Pap or
MSCHAP.
IP Address(0.0.0.0:Auto): Your WAN IP address. Leave this at 0.0.0.0 to obtain automatically an
IP address from your ISP.
Obtain DNS automatically: Click to activate DNS and to enable the system to automatically detect
DNS.
Primary DNS / Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the netmask.
MTU: Maximum Transmission Unit. The size of the largest datagram (excluding media-specific
headers) that IP will attempt to send through the interface.
Click Apply to confirm the settings.
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bipac 7800n

Table of Contents