Lan And Wan Port Addresses; Information From Your Isp - Billion BiPAC 5200S RC Series User Manual

3.4 LAN and WAN Port Addresses

The parameters of LAN and WAN ports are preset in the factory. The default values are
shown below.
IP address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs

3.5 Information from your ISP

Before configuring this device, you have to check with your ISP (Internet Service Provider)
what kind of service is provided such as PPPoE, PPPoA, RFC1483, or IPoA.
Gather the information as illustrated in the following table and keep it for reference.
PPPoE
PPPoA
RFC1483 Bridged
RFC1483 Routed
LAN Port
192.168.1.254
255.255.255.0
Enabled
100 IP addresses continuing from
192.168.1.100 through
192.168.1.199
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, Service Name, and Domain Name System (DNS)
IP address (it can be automatically assigned by your ISP when
you connect or be set manually).
VPI/VCI, VC-based/LLC-based multiplexing, Username,
Password, and Domain Name System (DNS) IP address (it
can be automatically assigned by your ISP when you connect
or be set manually).
VPI/VCI, VC-based/LLC-based multiplexing to use Bridged
Mode.
VPI/VCI, VC-based/LLC-based multiplexing, IP address,
Subnet mask, Gateway address, and Domain Name System
(DNS) IP address (it is fixed IP address).
30
WAN Port
The PPPoE function is
enabled to automatically
get the WAN port
configuration from the
ISP.