Quick Start
ADSL Mode
Step 1: Select WAN port connect mode from the connect mode drop down menu. There are two
types of connect mode to choose from: ADSL or EWAN. Here select ADSL and click Continue. If
you only want to configure Wireless, press Jump to Wireless setting.
Step 2: When ADSL line is not ready, the screen1 below will appear to remind you. Then you should
connect the ADSL line. While ADSL line is ready, the screen 2 below will appear to let you go
on.Here you can select Auto or Manually. Select Auto will go to step 3, and select Manually will go
to step 4.
Screen1
Screen 2
26