Ewan Mode - Billion BiPAC 7800 User Manual

EWAN Mode

Step 1: Select WAN port connect mode from the connect mode drop down menu. There are two
types of connect mode to choose from: ADSL or EWAN. Here select EWAN and click Continue. If
you only want to configure Wireless, press Jump to Wireless setting.
Step 2: there are four availabe protocols. Each protocol is described in the following sections
of EWAN Connect mode. Select the protocol. You can enable or disable VLAN Mux feature, if
enabled, you should enter the 802.1Q VLAN ID. For VLAN MUX setting, please refer to VLAN MUX
Setting for help. Click Continue to go on.
Step 3: The device will reboot and then load the new configuration.
35