Billion BiPAC 7800 User Manual page 57

WEP
Parameters
WLAN Service: Default setting is set to Enable. If you do not have any wireless, select Disable.
ESSID: The ESSID is the unique name of a wireless access point (AP) used to distinguish one from
another. For security propose, change to a unique ID name which is already built into the router
wireless interface. It is case sensitive and must not exceed 32 characters. Make sure your wireless
clients have exactly the ESSID as the device in order to connect to your network.
Hide ESSID: This function enables the router to become invisible on the network. Thus, any clients
using the wireless setting to search for available or specific router on the network will not be able to
discover the router whose Hide ESSID function is set to enabled. The default setting is disabled.
Regulation Domain: There are seven Regulation Domains for you to choose from, including North
America (N.America), Europe, France, etc. The Channel ID will be different based on this setting.
Channel ID: Select the wireless connection channel ID that you would like to use.
Note: Wireless performance may degrade if the selected channel ID is already being occupied
by other AP(s).
53