Pn: 1725-36033-001_E.doc - Polycom SpectraLink 8000 SVP100 Administration Manual

SpectraLink 8000 SVP Server: Administration Guide for SIP
34
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
When forwarding packets, the SVP Server shall always overwrite the
received DSCP value. The final DSCP tag for packets in each of the
traffic classes are assigned a DSCP value based on the following rules.
(Please see table on next page.)
• If both
Administration
value as shown in the table below will be used.
Default
• If is set at any number (Value X) other than
Administration
that setting (Value X) it will override the
.
Class
• If any of the
Traffic Class
other than , that setting (Value Y) will override the
Default
setting.
Administration
Traffic Class
Default
WT (In call)
Priority High
Value Y
Default
WT (Standby)
Priority Med
Value Y
Default
RTP
Priority High
Value Y
Default
PBX
Priority Med
Value Y
Default
Inter-SVP2
Priority Med
Value Y
Default DSCP settings will mark traffic for Best Effort handling under
normal circumstances. Please consider changing these values
based on the recommended QoS settings from your network
hardware manufacturer to achieve prioritization for your voice traffic.
and the setting is
Traffic Class
Default
settings are set at any value (Value Y)
Administration
Default Value X
4
Y
0
Y
4
Y
0
Y
0
Y

PN: 1725-36033-001_E.doc

, the
Default
,
Default
value of the
Traffic
X
Y
X
Y
X
Y
X
Y
X
Y