The Netlink Svp-Ii System Menu; Pn: 1725-36033-001_E.doc - Polycom SpectraLink 8000 SVP100 Administration Manual

SpectraLink 8000 SVP Server: Administration Guide for SIP

The NetLink SVP-II System Menu

24
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Connecting via telnet
Telnet can only be used after the SVP Server's IP address is
configured.
The telnet method of connection is used for routine maintenance of
the SpectraLink Server for both local and remote administration,
depending on your network.
To connect via telnet, run a telnet session to the IP address of the SVP
Server. Once you connect and log in, the
displays.
The main menu displays as shown here:
System Status
Menu for viewing error messages, status of operation and software
code version.
SVP-II Configuration
Allows you to set the mode and reset the system.
menu
NetLink SVP-II System

PN: 1725-36033-001_E.doc