Sendall; Pn: 1725-36033-001_E.doc - Polycom SpectraLink 8000 SVP100 Administration Manual

SpectraLink 8000 SVP Server: Administration Guide for SIP

SendAll

26
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
In an IP system with multiple SVP Servers, the
provided to speed configuration and to ensure identical settings. The
option allows you to send that configuration parameter to
S=SendAll
every SVP Server on the LAN.
address is established on EACH SVP Server via the serial connection.
If you anticipate identical settings across the LAN, set just the IP
address and custom hostname (if desired) for each SVP Server using
the initial serial connection. Then connect via the LAN and use
to set identical configuration options for all SVP Servers.
If is to be utilized in your system, all passwords must be
SendAll
identical. DO NOT CHANGE THE PASSWORD AT THE INITIAL
CONFIGURATION IF THE
default password and change it globally if desired after a LAN
connection is established for all SVP Servers.
If independent administration of each SVP Server is desired, the
passwords may be set at initial configuration.
The following options must be configured:
IP Address
Enter the IP address of the SVP Server, defined by your network
administrator. Enter the complete address including digits and
periods. may be entered.
DHCP
The SVP Server will automatically lock for maintenance if the IP
address is changed. When this
must be reset upon exit. All active calls are terminated during a reset.
Hostname
(Optional) change the default host name, if desired. This is the name
of the SVP Server to which you are connected, for identification
purposes only. You cannot enter spaces in this field.
The host names for each SVP Server and OAI Gateway on the
system must be unique.
Subnet Mask
The network administrator must define the subnet mask.
SendAll
can only be used after the IP
SendAll
OPTION IS DESIRED. Use the
SendAll
occurs, the SVP Server
Maintenance Lock

PN: 1725-36033-001_E.doc

option is
SendAll