Table of Contents
Advertisement
NOTE - a higher bitrate will use higher network bandwidth. The
video quality can be set between Level 1 to Level 6, with Level 6
producing the best image quality.
e. HTTP Transport – If MJPEG is used for Video Codec, users can
enable HTTP Transport protocol for video communication.
NOTE – HTTP Transport is for non-IE browser used only.
Click Apply to apply settings or Cancel to cancel changes.
NOTE – For best recording experience, configure the Network
Camera to one of the following frame rates based on the Flicker-Free
setting:
Flicker-Free
Outdoor
Indoor (50/60 Hz)
Frame Rate
25, 10, 7, 5, 3, 2
25, 20, 10, 7, 5, 3, 2
43
Advertisement
Table of Contents
Need help?
Do you have a question about the VD-130A V2 Series and is the answer not in the manual?