Brickcom VD-130A V2 Series User Manual page 45

E. Flicker-Free
Eliminate the problem of flicker. Click the Radio button to select outdoor or
indoor mode based on the conditions.
F. True Day & Night
a. Auto - The Network Camera automatically removes the filter by judging
the level of ambient light.
b. Manual - In day mode, enable the IR CUT to keep the IR cut filter
active at all times so the infrared light does not reach the sensor and
distort the color. In night mode, disable the IR CUT to deactivate the IR
cut filter at all times so the sensor accepts infrared light and improves
low light sensitivity.
c. IR LED - Select this option to turn on the IR Illuminators when in low
light conditions.
G. Light Sensor
The light sensor uses light sensitivity to signal the camera when to activate
the IR LED and switch to night mode. When the light exposure falls below
the threshold, the camera will automatically switch from day to night mode.
Select the threshold value from 0-255; higher threshold values raise
illumination sensitivity.
H. Color Effect
Select to display color or black and white video streams.
Click Apply to apply settings or Cancel to cancel changes.
41