Brickcom VD-130A V2 Series User Manual page 13

c. For dry bag installation:
Place the dry bag on the camera device and secure it using the strap tier
d. Open the conduit hole:
The conduit hole will allow for air to circulate through the camera
device .Use a screwdriver to unscrew either the conduit plug from the
side of the camera device
e. For ceiling installation:
Mount the camera device on the desired location. Use the screwdriver
from the product package to tighten the four included screws clockwise
through the four holes on each side of the device as shown below. The
best place to mount the camera is into a ceiling stud.
WARNING: Do not mount the camera on a soft material. The
camera may fall and be damaged.
9