Expansion Port; Monitor (Video) Port; Serial Port (Com 1); Hardware Overview-Internal Components - NEC VERSA 6050MH Service Manual

Versa 6000 series
Table of Contents

Advertisement

1-12
Technical Information

Expansion Port

This port provides a connection for NEC Versa options including the NEC PortBar 6000
and NEC Versa Docking Station 6000.

Monitor (Video) Port

Use this 15-pin port to attach an external monitor to your NEC Versa. You can run the
LCD display and the external monitor simultaneously or run either alone.

Serial Port (COM 1)

The 9-pin serial port provides a serial interface to which you can connect an RS-232C de-
vice such as an external serial printer or modem. A serial mouse is not supported.
HARDWARE OVERVIEW—INTERNAL COMPONENTS
Review the following sections for a description of the system's internal hardware.

Battery Pack

The system uses a rechargeable lithium-ion (Li-Ion) battery as its transient power source.
The battery pack installs in the compartment next to the VersaBay II on the bottom of the
NEC Versa. The battery stores 14.4 volts with a 2600 mAh capacity.
The battery pack powers the NEC Versa for approximately 2 to 4 hours. In addition, the
user detects how much battery power is available via the percentage displayed on the status
bar.
When battery power is getting low, connect the AC adapter to a wall outlet and recharge
the battery. It takes 2.5 to 7 hours to recharge the battery.

Hard Disk Drive

A standard 2.5-inch, 1.44 GB or 2.1 GB hard disk drive ships with the system. The 2.1-GB
hard disk drive specifications are listed next.
T
Track-to-track seek rate — 3 ms
T
Average seek time — 13 ms (read), 14 ms (write)
T
Revolutions per minute — 4200
T
Data transfer rate — 16.6 MB/sec
T
Media data rates — 38.6
bit/sec

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versa 6050mx

Table of Contents