Table of Contents
Advertisement
Personalizing Your Phone
I Clearing a Key
You want to clear the assignment made to a configurable key.
The
No function
function is provided specifically for this purpose.
<long>
<long>
No function
Configuring Line Keys
This section explains how to adapt your Line key settings to suit your personal requirements.
Your system administrator will determine whether your phone has Line keys.
I Setting the Response of a Line Key
You want to set the response of a Line key in case you are called on that Line key.
You can choose whether you also want a ringing signal in addition to the flashing Line key
when you receive a call on a Line key. You can configure a ringing delay for the ringing tone.
To answer a call you can choose between answering directly by pressing the Team key, picking
up the handset, and using automatic hands-free operation.
Answering an external call using automatic hands-free operation is not available.
The following audio settings are possible: Ringing, Melody, Speed, Answer.
To find out how to use a line key, refer to the Chapter
Notes:
• A line key can only be allocated to a configurable key.
• If you want to use a Line key under a configurable key of the Office DKBM expansion key module, it is
advisable to store it on level 1.
66
To clear a configurable key:
Press the configurable key and hold it down for a moment.
©
The display shows the key type.
To clear the Foxkey:
Press the Foxkey with a long keystroke.
The display shows the key type.
©
Scroll to
No function
and confirm
©
The key configuration is cleared.
Ok
with the Foxkey.
"Phoning over a Line
Key", page 47.
Hide quick links:
Advertisement
Table of Contents
