Table of Contents
Advertisement
Personalizing Your Phone
Configuring Line Keys
This section explains how to adapt your Line key settings to suit your personal requirements.
Your system administrator will determine whether your phone has Line keys.
Setting the Response of a Line Key
You want to set the response of a Line key in case you are called on that Line key.
You can choose whether you also want a ringing signal in addition to the flashing Line key
when you receive a call on a Line key. You can configure a ringing delay for the ringing tone.
To answer a call you can choose between answering directly by pressing the Team key, picking
up the handset, and using automatic hands-free operation.
Answering an external call using automatic hands-free operation is not available.
The following audio settings are possible: ringing, ringing melody, ringing signal speed,
answering mode.
To find out how to use a line key, refer to the Chapter
<long>
<Audio setting>
<Setting value>
Answer
<Setting value>
68
Press the Line key you want and hold it down for a moment.
The display shows the line key and the properties with which you can con-
figure the line
key.
Note:
The Personal key is also treated as a line key.
Scroll to the required audio settings and press the
Select the required setting and confirm with the
The setting is stored.
Note:
• Setting possibilities for ringing:
tone, and ringing tone
Foxkey.
• You can listen to each setting using the
Setting the answering mode:
Scroll to
Answer
and press the
Change the settings used to answer a call:
the line key,
Handset
to answer by picking up the handset, and
answer automatically with hands-free, and confirm with the
The setting is stored.
"Phoning over a Line Key",
Off
for no ringing tone,
Del
10s,
Del 20s
and
Del 30s
Test
Foxkey.
Modify
Foxkey.
Key
to answer the call by pressing
50.
Modify
Foxkey.
Ok
Foxkey.
On
for instant ringing
and confirm
Ok
with the
Hands-free
Ok
Foxkey.
to
Advertisement
Table of Contents
