Replacing The System Battery - Sun Microsystems W1100z User Manual

4.5.7

Replacing the System Battery

To remove and install the battery (see
1. Turn off the system and all of the peripherals connected to it, then unplug the AC
power cord from the system.
2. Remove the left-side access panel.
3. Gently lay the system on its right side on a stable, non-slip surface.
4. If a mezzanine card is present, remove it and/or the PCI card in Slot 1 to gain
access to the battery socket.
5. Insert a small flathead screwdriver between the battery and spring latch to
dislodge the battery from its socket (1).
6. Lift up the battery to remove it (2).
7. Insert a new battery with the positive sign (+) facing up, and ensure that it is
seated completely (3).
FIGURE 4-26
4-38 Sun Java Workstation W1100z and W2100z User Guide • January 2005
Removing and Installing the Battery
):
FIGURE 4-26