Replacing The Usb Audio Card Assembly - Sun Microsystems W1100z User Manual

4.5.10

Replacing the USB Audio Card Assembly

To remove the USB audio card assembly (see
1. Turn off the system and all of the peripherals connected to it.
2. Remove the left-side access panel and the front bezel.
3. Place the system unit on a flat, stable surface.
4. Disconnect the audio, USB, and IEEE 1394 cables from the audio board (1).
5. Working from the front of the chassis, unfasten the single screw securing the USB
audio card assembly to the system's front panel (2).
6. Gently lift the audio assembly up and slightly away from the front panel.
7. Remove the two screws that hold the audio board to the metal frame (3).
8. Withdraw the audio card from the metal frame (4).
FIGURE 4-30
Installation is the reverse of this procedure.
4-42 Sun Java Workstation W1100z and W2100z User Guide • January 2005
Removing the USB Audio Card
):
FIGURE 4-30