Show Results Summary; Accessing The Diagnostic Partition Under Windows - Sun Microsystems W1100z User Manual

3.6.6 Accessing the Diagnostic Partition Under
Windows
The Windows operating system does not allow the mounting of a diagnostic
partition. There is no way to view or gain access to the diagnostic partition if you are
running Windows on a Sun Java Workstation W1100z or W2100z.
The only way to retrieve the contents (log files) on the diagnostic partition is to
attach a USB floppy drive to the Sun Java Workstation W1100z or W2100z and
complete the following procedure:
1. Insert the USB floppy drive into any USB port on the Sun Java Workstation
W1100z or W2100z.
2. Insert the Supplemental CD into the CD-RW/DVD-ROM tray.
3. Reboot the workstation.
4. At the Supplemental CD Main Menu, type 3 to exit to DOS.
5. Type the following at the DOS command prompt:
C:> d:
6. To copy file a file named noinput.jrl to the USB floppy drive, type:
D:> copy d:\noinput.jrl a:\
The journal file is now saved to the floppy diskette in the USB floppy drive.
3.7

Show Results Summary

The summary lists the tests run and shows the results. Either Pass, Fail or N/A is
listed for each option.
The following list is a complete listing of all possible options available with the
Supplemental CD. If your own system does not have all of these options, they might
not show up when the Show Results Summary displays.
Processor
■
This section shows the following tests conducted against the processor: Core
Processor Tests, AMD 64 Bit Core Tests, Math Co-Processor Tests - Pentium Class
FDIV and Pentium Class FIST, MMX Operation, 3DNow! Operation, SSE
Instruction Set, SSE2 Instruction Set, and MP Symmetry.
Chapter 3 Diagnostics 3-17