Table of Contents
Advertisement
4.2.3
Postinstallation Instructions
Perform the following steps after installing a workstation component:
1. Ensure that all of the components are installed as described in the step-by-step
instructions.
2. Reinstall any PCI cards or peripherals that you had previously removed.
3. Reinstall the system's left-side panel and front bezel.
4. Connect all external cables to the system.
5. Turn on the system.
Caution – If the left-side panel and hard disk drives are removed, do not operate
the workstation for more than ten minutes. Improper cooling airflow might damage
the system's components.
Chapter 4 Maintaining the Workstation
4-3
Advertisement
Table of Contents
Troubleshooting
