Inner Chute/Pinch Roller Holder - Brother HL-5340D Service Manual

8.11.1 Inner Chute/Pinch Roller Holder

(1) Remove the seven bind B M4x12 Taptite screws, and then remove the Inner chute.
(2) Release all Hooks of the Inner chute and lift up the front side of the Inner chute.
(3) Pull out the Inner chute to the front side.
c
Top cover printed ASSY
Assembling Note:
• When assembling the Inner chute, secure the screws according to the order of alphabet
described in the figure above.
Taptite, bind B M4x12
d
Hooks
a
b
Inner chute
g
e
Taptite, bind B M4x12
Fig. 5-46
5-43
Taptite, bind B M4x12
f
Hooks
Confidential