Inner Chute Assy - Brother HL-L2300D Service Manual

9.7 Inner Chute ASSY

(1) Pull down the green envelope levers on both sides of the fuser unit.
(2) Remove the two taptite bind B M4x12 screws, and remove the inner chute ASSY.
Positioning holes
Assembling Note:
• When attaching the inner chute ASSY, engage the hooks on the inner chute ASSY with
the positioning holes on the top cover ASSY.
• After assembling the inner chute ASSY, pull up the green envelope levers on both sides
of the fuser unit.
Top cover ASSY
Hooks
Fuser unit
Inner chute ASSY
Green envelope lever
Fig. 3-14
3-20
Fuser unit
Green envelope
lever
Taptite bind B
M4x12
Confidential