Brother HL-5340D Service Manual page 48

<When a toner cartridge in use is inserted after "Replace Toner" is displayed
by toner sensor detection
A count value before changes is continuously indicated as a rotation rate of the develop
roller. Irrespective of the amount of toner, printing becomes disabled when the rotation rate
reaches the upper limit.
Corresponding counter, Setting value
Counter of toner cartridge changes
Page counter for each toner cartridge
Coverage for each toner cartridge
Developing bias voltage
*1
Excluding a toner cartridge in use in which there is a little toner remained.
*2
The developing bias voltage is reset to the initial setting once when a toner cartridge in use
is inserted.
Note :
• The discrimination between new and secondhand toner cartridges refers to the new
toner detection to be hereinafter described.
*1
>
No count up
Continued
Continued
Reset (Initial setting)
2-15
Operation
*2
Confidential