Brother HL-5340D Service Manual page 304

Title
RESET COUNT
NV-RAM DEBUG
PPDS SUBSET
TEST MENU
Subtitle
CLEAR COVERAGE
CLEAR ERROR HIST
NV-RAM HEX PRINT
ON/OFF
FAN TEST
FAN 1=ON/OFF*
MOTOR TEST
MAIN MOTOR=
ON/OFF*
SCAN MOTOR=
ON/OFF*
SENSOR TEST
FRONT COVER=
ON/OFF
T1 KOUTAN=ON/OFF T1 tail edge sensor
T2 KOUTAN=ON/OFF T2 tail edge sensor
T3 KOUTAN=ON/OFF T3 tail edge sensor
REGI-MAE=ON/OFF
REGI-ATO=ON/OFF
EJECT=ON/OFF
T1 PAPER=ON/OFF
T2 PAPER=ON/OFF
T3 PAPER=ON/OFF
MP PAPER=ON/OFF
DX UNIT=ON/OFF
REAR COVER=
ON/OFF
NEW TONER=
ON/OFF
T2 CONNECT=
ON/OFF
T3 CONNECT=
ON/OFF
T4 CONNECT=
ON/OFF
TONER=ON/OFF
7-27
Description
Initialize average coverage counter
of toner during use.
Initialize error history.
Prints NV-RAM HEX dump.
Supports the PPDS Subset
command in the FX Emulation mode.
Carries out movement test of FANs.
Carries out movement test of main
fan, LVPS fan.
Carries out movement test of main
motor.
Carries out movement test of
scanner motor.
Front cover sensor (ON: Close)
Regist front sensor
Regist rear sensor
Paper eject sensor
Tray 1 paper sensor
Tray 2 paper sensor
Tray 3 paper sensor
MP Tray paper sensor
The DX unit is closed. (ON: Close)
Back cover sensor (ON: Close)
New toner sensor
Tray 2 connect sensor
Tray 3 connect sensor
Tray 4 connect sensor
Toner sensor (ON: Light reception)
Confidential