Brother HL-5340D Service Manual page 298

Title & Subtitle
PS CELL MODE
HP ESC E COMMAND HP ESC E=RESET*
DPX FF SUP. MODE
COPY PAGES
JOB TIMEOUT SEL
PICKUP RETRY SET
PICKUP RETRY SET
PSCOPYPAGE
1JOB1PAGE SEL
APPLEUSBPS
MP CAS ADJUST
NET HEAP SIZE
PS FONT CACHE
Item to be Set
PS CEIL=FLOOR*
PS CEIL=CEIL
HP ESC E=F/F
DPX SUP. =NOMAL*
DPX SUP. =SPEC.
COPY PAGES=ON*
COPY PAGES=OFF
TIMEOUT=ON*
TIMEOUT=OFF
PICKUP RETRY=2*
(0-7)
TIME OUT=???sec
PSCOPYPAGE=L3*
PSCOPYPAGE=L2
1JOB1PAGE=SX*
1JOB1PAGE=DX
BINARY=OFF*
BINARY=ON
MPTRAY YADJUST
PCTRAY YADJUST
DUPLEX YADJUST
MPTRAY XADJUST
TRAY1 XADJUST
TRAY2 XADJUST
TRAY3 XADJUST
DUPLEX XADJUST
HEAPSIZE=xxxxK*
CLEAR CACHE=OFF*
CLEAR CACHE=ON
7-21
Description
Normal resetting.
Form feeds a printable page only.
Deletes all white pages having no
data.
Deletes only the page that both sides
of paper is white.
OFF: 1 page is fixed for the copy
page number.
PJL JOB TIMEOUT is effective.
PJL JOB TIMEOUT does not carry
out.
Changes the PS copypage operator
from Level3 to Level2.
Duplex=ON makes the printing
speed of 1 page of data faster.
Sets up the printing mode. (Simplex/
Duplex)
Enables to print PS Pure Binary data
via Mac USB.
Adjusts the position of starting
scanning in each paper tray.
-50 to 50 dot (300dpi)
Adjusts the position of starting
scanning in each paper tray.
-100 to 750 dot (300dpi)
Changes the size of the beep area
used on Web. Allows you to change
the size by 15 degrees. (The value
from 0 to 14 is stored in the NVRAM
internally.)
Controls whether the font cache is
cleared or not when finishing a job in
the PS emulation. When setting to
OFF, the font cache is not cleared
and is enabled for the next job. When
setting to ON, the font cache is
cleared and disabled for the next job.
Confidential