7.27-4 Inner Chute/Pinch Roller Holder - Brother HL-5240 Service Manual

7.27-4 Inner Chute/Pinch Roller Holder

(1) Remove the
(2) Release all Hooks of the Inner chute and lift up the front side of the Inner chute.
(3) Pull out the Inner chute to the front side.
Taptite, bind B M4x12
c
Top cover printed ASSY
Assembling Note:
When assembling the Inner chute, secure the screws according to the order of alphabet
described in the figure above.
(4) Turn the Inner chute upside down.
(5) Remove the Pinch roller holder from the Inner chute.
Pinch roller holder
Assembling Note:
When assembling the Pinch roller holder, be sure that its direction is correct as shown in the
figure above.
bind B M4x12 Taptite screws, and then remove the Inner chute.
six
b
d
Hooks
Pinch roller holder
HL-5240/5250DN/5270DN/5280DW SERVICE MANUAL
a
Inner chute
e
Taptite, bind B M4x12
Fig. 5-66
Fig. 5-67
5-47
Taptite, bind B M4x12
f
Hooks
Inner chute
Confidential