Ps Pcb Unit - Brother HL-5340D Service Manual

8.27

PS PCB Unit

(1) Turn the Printer upside down.
(2) Remove the five bind B M4x12 Taptite screws, and then remove the Base plate LV.
(3) Remove the Screw pan (S/P washer) M3.5x6 from the Base plate LV to remove the PS
PCB unit terminal.
Taptite bind B M4x12
Base plate LV
<Back side>
Assembling Note:
• When assembling the Base plate LV, Direct the cable side of the PS PCB unit terminal
to the backward (Fig. 5-91: To the direction of an arrow of the enlarged illustration.), and
align parallel the PS PCB unit terminal with the side of the Base plate LV.
Taptite bind B M4x12
Screw pan (S/P washer) M3.5x6
Fig. 5-92
5-69
PS PCB unit terminal
Confidential