Table of Contents
Advertisement
Configuring the WAP2000 Access Point
Setting Up Your Access Point
STEP 1
STEP 2
STEP 3
STEP 4
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
Configuring Network Setup Settings
To configure the network setup settings of the access point, follow these steps:
Click Setup > Basic Setup.
From the IP Settings drop-down menu, select one of the following options:
•
Static IP Address—Select this option to assign a static or fixed IP address
to the access point.
•
Automatic Configuration - DHCP—If you have a DHCP server enabled on
the LAN and want it to assign an IP address to the access point, select this
option.
If you selected Static IP Address, enter the following information in the Network
Setup section:
•
Local IP Address—Enter the IP address of the access point. Make sure the
address is not used by other devices on the network. The default is
192.168.1.245.
•
Subnet Mask—Enter the subnet mask of your network. The default is
255.255.255.0.
•
Default Gateway—Enter the default gateway address, typically the IP
address of your router.
•
Primary DNS—Enter the IP address of the Domain Name System (DNS)
server. This address is typically provided by your Internet Service Provider
(ISP).
•
Secondary DNS—(Optional) Enter a second DNS server.
Click Save.
6
20
Hide quick links:
Advertisement
Table of Contents
