Configuring Wpa2-Personal Mixed - Cisco WAP2000 Administration Manual

Configuring the WAP2000 Access Point
Configuring Wireless Settings
STEP 3
STEP 4
STEP 5
STEP 6
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
To enable wireless isolation across SSIDs, select Enabled from the drop-down
menu. Otherwise, select Disabled.
To enable wireless isolation within SSID, select Enabled from the drop-down
menu. Otherwise, select Disabled.
Provide the following information:
• Encryption—WPA2 always uses AES for data encryption.
• Shared Secret—Enter a shared secret of 8–63 characters.
• Key Renewal Timeout—Enter a key renewal timeout period, which instructs
the access point how often it should change the encryption keys. The default
is 3600 seconds.
Click Save.

Configuring WPA2-Personal Mixed

This security mode supports the transition from WPA-Personal to WPA2-Personal.
You can have client devices that use either WPA-Personal or WPA2-Personal.
6
29