Using A Poe Router Or Switch To Connect The Wap2000; Using A Standard Router Or Switch To Connect The Wap2000 - Cisco WAP2000 Administration Manual

Installing the WAP2000 Access Point
Connecting the Equipment
STEP 1
STEP 2
STEP 3
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide

Using a PoE Router or Switch to Connect the WAP2000

To connect the WAP2000 to your network using a PoE router or switch, use the
supplied Ethernet cable to connect the Ethernet port of the access point to a PoE
port on the PoE router or switch.
The LEDs on the front panel light up as soon as the WAP2000 powers on.

Using a Standard Router or Switch to Connect the WAP2000

To connect the WAP2000 to your network using a standard switch, follow these
steps.
Use the supplied Ethernet cable to connect the Ethernet port of the access point
to an Ethernet port on the router or switch.
Connect the included power adapter to the Power port of the WAP2000.
Plug the power adapter into an electrical outlet.
4
11