Table of Contents
Advertisement
Installing the WAP2000 Access Point
Placement Tips
Placement Tips
Wall Mounting
STEP 1
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
You can place your WAP2000 on a desktop or mount it on a wall.
•
Ambient Temperature—To prevent the WAP2000 from overheating, do not
operate it in an area that exceeds an ambient temperature of 131°F (55°C).
•
Air Flow—Be sure that there is adequate air flow around the WAP2000.
•
Mechanical Loading—Be sure that the WAP2000 is level and stable to
avoid any hazardous conditions.
•
Power Outlet—Choose a location that is within reach of a power outlet.
For desktop placement, place the WAP2000 horizontally on a flat surface so it sits
on its four rubber feet.
The WAP2000 can be mounted either vertically or horizontally.
Determine where you want to mount the access point and install two screws (not
supplied) into the wall for either vertical or horizontal placement.
For horizontal placement, orient the access point as shown:
Wall
mount
slots
5-7/8˝
4
9
Hide quick links:
Advertisement
Table of Contents
