Configuring the WAP2000 Access Point
Verifying Access Point Status
STEP 1
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
Checking Wireless Status
The Status > Wireless window displays the access point's current status
information for the wireless networks.
To check the wireless network status of the access point, follow these steps:
Click Status > Wireless.
This page displays the status of the wireless network:
•
MAC Address—The MAC address of the access point's wireless interface.
•
Mode—The access point's wireless network mode.
•
Channel—The access point's channel setting for the SSID.
•
Bandwidth Utilization—The percentage of the bandwidth being used.
•
VLAN Trunk—The VLAN Trunk status.
•
Priority Setting—The priority setting status.
•
SSID 1–4—Information about the access point's configured SSIDs.
6
63