Configuring Wpa-Enterprise - Cisco WAP2000 Administration Manual

Configuring the WAP2000 Access Point
Configuring Wireless Settings
NOTE
STEP 1
STEP 2
STEP 3
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide

Configuring WPA-Enterprise

This option features WPA used in coordination with a Remote Authentication Dial-
In User Service (RADIUS) server for client authentication.
Enterprise modes use a RADIUS server for authentication.
Use WPA-Enterprise only when a RADIUS server is connected to the access point.
To configure the WPA-Enterprise wireless security settings for the access point,
follow these steps:
Click Wireless > Security.
From the Security Mode drop-down menu, select WPA-Enterprise.
To enable wireless isolation across SSIDs, select Enabled from the drop-down
menu. Otherwise, select Disabled.
6
31