Appendix A: Troubleshooting - Cisco WAP2000 Administration Manual

Troubleshooting
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide
This appendix provides solutions to problems that may occur during the
installation and operation of the WAP2000 Wireless-G Access Point with Power
Over Ethernet.
If you can't find an answer here, check the Cisco website at www.cisco.com.
Can the WAP2000 Access Point act as my DHCP Server?
No. The WAP2000 Access Point is nothing more than a wireless hub, and as such
cannot be configured to handle DHCP capabilities.
Can I run an application from a remote computer over the wireless network?
This depends on whether the application is designed to be used over a network.
Consult the application's documentation to determine if it supports operation over
a network.
Can I play multiplayer games with other users of the wireless network?
Yes, as long as the game supports multiple players over a local area network
(LAN). Refer to the game's documentation for more information.
What is the IEEE 802.11b standard?
It is one of the IEEE standards for wireless networks. The 802. 1 1b standard allows
wireless networking hardware from different manufacturers to communicate,
provided that the hardware complies with the 802. 1 1b standard.
The 802. 1 1b standard states a maximum data transfer rate of 11 Mbps and an
operating frequency of 2.4 GHz.
What is the IEEE 802.11g standard?
It is one of the IEEE standards for wireless networks. The 802. 1 1g standard allows
wireless networking hardware from different manufacturers to communicate,
provided that the hardware complies with the 802. 1 1g standard.
The 802. 1 1g standard states a maximum data transfer rate of 54 Mbps and an
operating frequency of 2.4 GHz.
A
67