Upgrading The Firmware - Cisco WAP2000 Administration Manual

Configuring the WAP2000 Access Point
Configuring Administration Settings
!
CAUTION
STEP 1
Cisco WAP2000 Wireless-G Access Point with Power Over Ethernet Administration Guide

Upgrading the Firmware

The Administration > Firmware Upgrade window allows you to upgrade the
access point's firmware.
Do not upgrade the firmware unless you are experiencing problems with the
access point or the new firmware has a feature you want to use. Upgrading the
firmware deletes all custom settings. To preserve your custom settings, save them
to disk before upgrading the firmware, as described in
Point's Configuration," on page
To upgrade the firmware of the access point, follow these steps:
Upgrade the firmware of the access point.
a. Download the firmware upgrade file from
ps10049/index.html.
b. Extract the firmware upgrade file and save it on your computer.
c. Click Administration > Firmware Upgrade.
d. Enter the location of the firmware upgrade file in the field provided or click
Browse to locate the file.
60.
www.cisco.com/en/US/products/
6
"Managing the Access
58